Loading ...
Loading ...
Loading ...
Installation and connection en
39
Product package
If you have any complaints, contact
the dealer where you purchased
the appliance or our customer service.
Dishwasher
Instructions for use
Installation instructions
Warranty*
Installation materials
Steam guard plate*
Rubber apron*
Power cord
* depending on model
Safety instructions
Please follow the safety instructions
under “Installation”.
Delivery
Your dishwasher has been checked
thoroughly in the factory to ensure that it
is in working order. This may cause
small water stains. These will disappear
after the first wash cycle.
Technical specifications
Weight:
max. 45 kg
Voltage:
220–240 V, 50 Hz or 60 Hz
Connected load:
2000–2400 W
Fuse:
10/16 A (UK 13A)
Power input:
off mode (Po)* 0.10 W
left on mode (Pl)* 0.10 W
*according to regulations (EU) nos.
1016/2010 and 1059/2010
Additional functions and settings may
increase the power input.
Water pressure:
at least 0.05 MPa (0.5 bar), maximum
1 MPa (10 bar). At a higher water
pressure: connect pressure-reducing
valve ahead.
Inlet rate:
minimum 10 litres/minute
Water temperature:
Preferably cold water; if hot water,
depending on type of water inlet hose,
max. temp. 60 °C (see Drinking water
connection).
Capacity:
9–10 place settings (depending
on model).
Loading ...
Loading ...
Loading ...