Loading ...
Loading ...
Loading ...
Functions
Note: The buzzer beeps twice when the power supply is rst turned on. The unit
is in ‘standby’ until the On/O button is pressed.
The horizontal louvres need to be opend manually by hand.
ON/OFF
Press the ON/OFF button to turn the unit ON. The default settings when rst turned
on are low fan speed, normal wind mode, and no timer. When turning the unit back
on after powering it o, the state upon turning it o will be memorised, excluding
the timer setting. If the sleep wind mode was on before turning o, the mode will
not be memorized after turning it on again, but the normal wind mode will start.
To turn the unit OFF press this button again. It may take a few seconds to power o
completely.
SWING
Press this button to turn on the SWING function, the vertical louvres will move left
to right as the synchronous motor switches on/o the vertical fan blades.
SPEED
The fan SPEED can be selected in the following sequence: low (1) > medium (2)
> high (3) > low (1).... The selected fan speed LED indicator light will illuminate
accordingly.
Remote Control
On/O Swing
Speed Timer
Mode
Display
Cooler/Humidier
9
Loading ...
Loading ...
Loading ...