Loading ...
Loading ...
Loading ...
7
CONTROLS AND SETTINGS
The cycle time will be extended
until the proper water temperature
is reached. Washing action will
continue during the water heating
delay. For best results, the incoming
water temperature should be at least
120
o
F (49
o
C).
The sanitize criteria may not be
satisfied if there is an interruption
of the cycle, power failure or if the
incoming water temperature is
below 120
o
F (49
o
C).
Press the Temp pad a second time
to turn o the Sanitize option. The
light beside the Sanitize pad will
turn o.
High Temp Option
When the High Temp option is
selected, the dishwasher heats water
in the main wash to approximately
155
o
F (68
o
C).
This increase in water temperature
helps the dishwasher detergent
remove food grease and soil from
dishes more eectively and aids in
improved drying performance.
When the High temp wash option
is selected, the High temp indicator
will come on and remain on until the
end of the cycle. To turn o the High
temp wash option, press the Temp
pad to select a dierent temperature
option.
3
Max Dry
When the Max Dry option is
selected, the dishwasher extends
drying time by approximately 20
minutes. The Max Dry
option can be
used with all cycles except Energy
Saver. For best drying performance,
also apply an increased wash
temperature by selecting High Temp
or even better, the Sanitize option.
The energy required to use the Max
Dry option costs pennies per cycle.
You may choose not to select the
Max Dry option; however you may
have items in your dish load that will
not be completely dry at the end of
the cycle.
Heat Dry
The Heat Dry option in combination
with rinse aid will enhance drying
performance. The energy required
to use the Heat Dry option costs
pennies per cycle; however you will
have items in your dish load that will
not be completely dry at the end of
the cycle.
Select the Normal Wash cycle and
High Temp wash option along with a
Rinse Aid agent for improved drying
performance.
4
Delay Time
The Delay option allows you to
automatically delay starting your
dishwasher from 2-4-6 hours.
To activate delay option, press
the pad once for a 2 hour delay,
twice for 4 hours and three times
for 6 hours. A light will come on
indicating the delay start hours and
will remain on until cycle starts.
Press the START/CANCEL pad to
start the delay option. If the delay
option is interrupted, the START/
CANCEL pad will have to be pressed
again to return to delay option.
To cancel the DELAY option and to
begin the selected cycle before the
delay period is over, press and hold
START/CANCEL pad for 3 seconds.
5
Start/Cancel Button
When cycle and options are
selected, LEDs of selected cycle and
options are illuminated. The status
window displays the cycle time.
To start the cycle, press START/
CANCEL pad and close the
dishwasher door immediately.
You can cancel a cycle anytime
during the cycle. Press and hold
the START/CANCEL pad for 3
seconds. The light beside the cycle
and option selected will go out, the
START/CANCEL light will remain
illuminated, the dishwasher will start
a 90 second drain. At the end of the
drain, select the next desired cycle.
6
Status indicator Lights
The Washing light comes on at the
beginning of the cycle and remains
on until the end of the main wash.
The Clean light will come on at the
end of cycle and remain on until the
door is opened.
When the Sanitize option is
selected, the Sanitized light will
glow when the Sanitize cycle is
finished. If the dishwasher did not
properly sanitize the dishes, the
light will not come on. This can
happen if the cycle is interrupted.
The light will remain on until the
door is opened.
Loading ...
Loading ...
Loading ...