Loading ...
Loading ...
Loading ...
6 | PREPARING AND USING THE PERSONAL JAR
USING PULSE MODE/ICE CRUSH MODE
Your Blender offers a Pulse/Ice Crush function with a soft start to avoid ingredient splatter.
When turning the Control Dial to the Pulse/Ice Crush (
P
) function, the Blender will operate
at optimal speed to crush ice. This function will continue until you release the Control Dial,
returning to (O).
1 Place ingredients or Ice cubes into the Blender Jar.
Firmly secure Lid with Lid Center Cap on Blender Jar.
2
Turn and hold the Control Dial from (O) to Pulse/Ice
Crush (
P
) function. The Blender will run at optimal
ice crush speed. When nished, release the Control
Dial to stop the Blender.
You may hold Control Dial on Pulse/Ice Crush (
P
)
function as per desired interval of time. See “Blender
Function Guide” for more information.
PREPARING AND USING THE BLENDER
6 When nished, turn the Blender off by returning
Control Dial to (O).
Unplug the Blender before removing the Blender Jar.
PREPARING AND USING THE PERSONAL JAR
PREPARING THE PERSONAL JAR FOR USE
The Personal Jar is the perfect size and handy to carry with you on the go.
Before using your Personal Jar for the rst time, wash Jar, Lids, and Blade Assembly in
warm, sudsy water (see “Care and Cleaning” section). Rinse parts and wipe dry. Be sure the
countertop beneath the Blender and surrounding areas are dry and clean.
IMPORTANT: Allow the Blender to fully stop before removing the Lid, Blender Jar, or pouring
out your blended ingredients.
TIP: Use half of standard ice cube tray or 7-8 standard ice cubes at a time for blending.
The Ice Crush feature has been optimized to crush and chop ice without adding any liquid
ingredients.
IMPORTANT: Do not blend hot liquids and ingredients in the Personal Jar.
Loading ...
Loading ...
Loading ...