SKIL SR232301 Owner’s Manual

Loading ...

OPERATING INSTRUCTIONS

WARNING

Disconnect the plug from the power source before any assembly,

adjustments or changing accessories. Such preventive safety measures

reduce the risk of starting the tool accidentally.

Backing Pad Removal/Installation

Your Multi-Function Detail sander is equipped

with a hook- and-loop rubber backing pad that

may be removed and attached without the

need for additional tools.

To remove, push the button for changing the

foot plates and pull the backing pad free from

the sander (Fig. 2).

Rotating Backing Pad

For maximum use of the sandpaper, rotate the

pad 120 degrees when the tip of the sandpaper

becomes worn (Fig. 3).

Installing Sandpaper

Your sander uses hook-and-loop backed sand-

paper, which rmly grips the backing pad when

applied with moderate pressure.

To change, merely peel off the old sandpaper,

remove any dust from the backing pad, and

press the new sandpaper in place. Be sure to

align the sanding sheet holes with the holes

in the backing pad to allow the dust extraction

system to function (Fig. 4).

Fig. 2

Fig. 3

Fig. 4

Loading ...

SKIL SR232301 Corded Multi-Function Detail Sander