Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
HEATING FEATURE (on some models):
i
DO THIS:
PRESS
MODE BUTTON
SELECT HEAT
YOU WILL SEE:
Note: This feature can be used with any combination of FAN Speeds(Low speed only on 115V models), Timer, or Steep Modes•
When in the "Heat' Mode,the fan will run continuously while heat is needed. The temperature will automatically be maintained
anywhere between 55°F (13°C) and 80°F (27_C) When the room set temperature is satisfied, the fan wilt cycle off and on to
circulate and sample the room air.
TO TURN UNIT OFF:
DO THIS:
PRESS
ON/OFF BUTTOT
YOU WILL SEE:
i ill
/_!i!i
FAULT CODES
If the display reads "AS", a sensor
has failed• Contact your Authorized
Frigidaire Service Center
If the display reads "HS", a sensor
has failed. Contact your Authorized
Frigidaire Service Center
tfthe display reads"ES", a sensor
has failed. Contact your Authorized
Frigidaire Service Center
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your controt that you should know.
o
®
o
o
The Remote Control wilt operate all the controt panel features, follow the same instructions.
The"tool"circuit has an automatic3 minute time delayed start if the unit is turned off
and on quickly. This prevents overheating of the compressor and possible circuit
breaker tripping. The fan will continue to run during this time.
The control will maintain any set temperature between 60F and 90F degrees (cooling), 55F and 80F (heating)•
The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from
one to the other, press and hold the Up and Down Temperature Selection Pads at the same time for 3
seconds•
9
Loading ...
Loading ...