Loading ...
Loading ...
Loading ...
9
ENGLISH
WARNING: Never suspend SUB Series subwoofers by there handles. Handles are intended
for transportation, not for rigging
WARNING: Always make sure that the maximum current requirement does not exceed
the maximum admitted POWERCON current. In case of doubt call the closest RCF SERVICE
CENTRE.
INTERNAL FUSE SETTINGS
220-240V FUSE T 6.3 A H 250 V (2 X SUB 8006-AS)
100-120V FUSE T 10 A H 250 V (2 X SUB 8006-AS)
INSTALLATION
STACKING
SUB 8006-AS,
SUB 8005-AS,
SUB 8004-AS
INTERNAL FUSE
WARNING
WARNING
CARDIOID SET-UP
It is possible to create subwoofer cardioid systems using groups of three modules.
A group is made of three modules, the group shall be made as follow:
- 2 modules pointing in forward direction, cardioid switch released;
- 1 module pointing in backward direction, cardioid switch pressed;
- all 3 modules shall have the same settings (system delay, sensitivity, x-low cut, x-over,…).
It is possible to stack HDL 20-A:
- on top of SUB 8006-AS (vertical or horizontal position)
- on top of SUB 8005-AS (horizontal position)
- on top of SUB 8004-AS (horizontal position)
It is possible to stack HDL 10-A:
- on top of SUB 8006-AS (vertical or horizontal position)
- on top of SUB 8005-AS (vertical or horizontal position)
- on top of SUB 8004-AS (vertical or horizontal position)
It is possible to stack NXL23-A
- on top of SUB 8006-AS (horizontal position)
- on top of SUB 8005-AS (horizontal position)
It is possible to stack NXL24-A on top of SUB 8004-AS, SUB 8005-AS, SUB 8006-AS
Always stack the systems using the HDL 20-A, HDL 10-A, NXL 23-A fly bar and the locking
accessory (part number 13360231).
Loading ...
Loading ...
Loading ...