Loading ...
Loading ...
Loading ...
E-10
E-11
LIMITED WARRANTY
To the consumer, Guardian Technologies LLC warrants this product to be free of defects in materials or
workmanship commencing upon the date of the original purchase. Save your original sales receipt to validate
start of warranty period. W arranty is not valid without receipt. If this product should become defective within
the warranty period, we will repair or replace any defective parts free of charge. All warranty repairs must be
completed by Guardian Technologies LLC. This warranty does not cover unauthorized repairs. The warranty
does not include unusual wear, damage resulting from accident, or unreasonable use of the product. This
warranty only covers the product when used with genuine Guardian Technologies accessories. This warranty
covers product that was purchased from authorized distributors. This warranty gives you specific legal rights
and you may also have other rights (other rights may vary from state to state in the U.S.A.)
The product warranty registration can be completed online at www .guardiantechnologies.com.
We consider the registration process important to ensuring superior service to our customers, however
submitting the warranty registration is optional and does not affect your rights to utilize this warranty according
to the conditions stated above. To submit product under warranty the complete machine must be delivered
pre-paid to Guardian Technologies LLC. Please include complete information including: the problem, the
model number of the product, the day of purchase, and a copy of the original sales receipt along with your
name, address, and telephone (email optional). Address returns to the attention of: Customer Service, at the
address below . Additional questions or comments can be made toll free to the number listed below.
Guardian Technologies LLC
26251 Bluestone Blvd. • Euclid, Ohio 44132
1.866.603.5900
www.guardiantechnologies.com
Additional copies of the instruction manual can be obtained by accessing and
printing directly from our website or calling customer service.
This product has been tested and complies with the requirements for Federal
Communications Commission, Part 18 for Radio/TV/Communication interference.
Although tested, it may affect these devices. If the humidifier is found to interfere,
separate the device and/or the humidifier. Conduct only the user maintenance found
in this manual. Other maintenance and servicing can cause harmful interference
and can void the required FCC compliance.
TROUBLE SHOOTING GUIDE
Water vapor and humidity
are not produced.
Power Plug: Unplug and then try again.
Power Failure: When the power is returned, try again.
Tank Installation: Make sure the tank is correctly attached.
The surface of the ultrasonic disk is dirty:
Clean ultrasonic disk. (see pg. E-8)
PROBLEM
SOLUTION
Air blows but water vapor
is not produced.
Excessive W ater: Remove a certain amount of water from the
tank. Increase mist setting.
Detergent residue and/or oil ingredients from cosmetics, etc
may be in tank; wash out tank and try again.
The surface of the ultrasonic disk is dirty: Clean ultrasonic disk.
(see pg. E-8) If you use hard water, replace with softer water .
Humidity level is low.
The surface of the ultrasonic disk is dirty: Clean ultrasonic disk.
(see pg. E-8) The water in the unit is too cold: Replace with cool,
but not cold water. Damage on the ultrasonic disk:
Contact Customer Service 1.866.603.5900
The humidity has
a bad smell.
Poor maintenance or dirty water: Clean the product thoroughly,
and fill it with fresh water. (see pg. E-8)
White dust is forming on
nearby furniture.
Hard water may deposit a certain amount of dust. Dust in the air
also settles because of added humidity in the room. Use distilled
water if this becomes a nuisance.
FLTDC20 filter is available at www.guardiantechnologies.com
or through customer service 1.866.603.5900
Unit has stopped working.
No or low water. Unplug unit and refill tank.
Unit shuts off unexpectedly
or does not operate.
Check that the safety device triggered. To restart, unplug for
5 seconds, replug then press the power button.
Call Customer Service 1.866.603.5900.
Water is accumulating
outside of unit or area
surrounding unit.
Saturation of humidity. Lower mist control setting.
Unit not level and water is accumulating. Unplug and place on
level surface. Point spray away from objects. Raise unit on a
water-resistant level surface 2-3 feet off of floor.
Water dripping
when refilling.
Water remaining on bottom of tank. Wipe tank or tilt to drain
before transporting. Make sure both A and B tank caps are
secured tightly.
Increased noise level.
Unit must be placed on a flat, level, hard surface.
Make sure it is NOT placed on a soft or absorbent surface.
Loading ...
Loading ...
Loading ...