Loading ...
Loading ...
Loading ...
4
SAFETY INSTRUCTIONS
• Children should be supervised to ensure that they do not play with
the appliance.
• Do not, under any circumstances, cut or remove the ground prong
from the power cord. To prevent personal injury or damage to the
appliance, the electrical power cord must be plugged into a properly
grounded outlet.
• This appliance must be plugged into a 220-240 VAC, 50-Hz grounded
outlet protected by a 15-ampere fuse or circuit breaker. Failure to
follow these instructions can result in fire, explosion, or death.
• This appliance must be plugged into a properly grounded 3 pin
outlet. Electrical shock can result if the appliance is not properly
grounded. Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded. Failure to
follow these instructions can create an electric shock hazard and/or a
fire hazard.
• Install the appliance where the plug is easily accessible. Unplug the
appliance when not in use to avoid risk of fire or electric shock.
• Unplug the appliance before disassembly or repair to avoid risk of
electric shock.
• The appliance should always be plugged into its own individual
electrical outlet which has a voltage rating that matches the rating
plate. This provides the best performance and also prevents
overloading house wiring circuits which could cause a fire hazard
from overheated wires.
• Do not use an extension cord to connect to an outlet. Doing so could
result in a fire or electric shock.
• Never unplug your appliance by pulling on the power cord. Always
grip the plug firmly and pull straight out from the outlet. The power
cord can be damaged, resulting in a risk of fire and electric shock.
• Contact LG or a qualified repair person immediately to repair or
replace all power cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage
along its length or at either end. The power cord can melt, creating
electric shock and/or fire hazard.
Loading ...
Loading ...
Loading ...