Loading ...
Loading ...
Loading ...
7
Features
Battery Replacement
Under normal conditions, the original battery in your UPS will last several years. Battery
replacement should only be performed by qualified personnel. Refer to “Battery Warnings”
in the Safety section for complete battery safety information.
• OMNISMART550MX requires one 12V 9Ah replacement battery.
• OMNISMART750MX requires one 12V 9Ah replacement battery.
• OMNISMART1050MX requires one 12V 10Ah replacement battery.
For further information about replacement compatibility and ordering, visit Tripp Lite on the
Web at tripplite.com/products/battery-finder.
Battery replacement must be done using the same battery type and
quantity: 12V DC sealed lead-acid, 6 cell, and in compliance with UL 1989.
CAUTION: Risk of energy hazard. Before replacing batteries, remove
conductive jewelry such as chains, wrist watches and rings. High energy
passing through conductive materials may cause severe burns.
5
USB Communication Port: This port can connect your UPS to a computer in order to
automatically save open files and shut down the computer if it is left unattended during
an extended power failure. Use with Tripp Lite’s PowerAlert
®
software and appropriate
USB cable. Download PowerAlert software free of charge from tripplite.com/support and
follow the installation instructions. Any user-supplied USB cable may be used to connect
your UPS to your computer.
Notes:
• This connection is optional. The UPS will work properly without this connection.
• The UPS automatically provides basic communication compatibility with many integrated
Windows
®
, Macintosh
®
and Linux
®
power management applications.
6
Tel/DSL/Network Protection Jacks: 8-wire RJ-style jacks protect a single tel/DSL dialup
or 10Base-T Ethernet line connection.
Note: Connecting your equipment to these jacks is optional. Your UPS will work properly
without this connection.
7
Resettable Input Circuit Breaker: Protects your electrical circuit from overcurrent draw
from the UPS load. If this breaker trips, remove some of the load, then reset by pressing it in.
•
Breaker for OMNISMART550MX: 7A, 125V AC
•
Breaker for OMNISMART750MX: 10A, 125V AC
•
Breaker for OMNISMART1050MX: 15A, 125V AC
Loading ...
Loading ...
Loading ...