Loading ...
Loading ...
Loading ...
The safety labels should always be clean and legible and be followed precisely to avoid
accidents, but if the signs are damaged or lost or belong to parts that were exchanged, they
must be replaced by new original signs to be requested from the manufacturer and attached at
the designated places.
In the case of fires, dry chemical extinguishing agents must be used. Fires at the machine may
not be extinguished with a water jet due to risk of short-circuit.
If the fire cannot be immediately extinguished, one has to pay attention to the spilled fluids.
In case of persistent fire, the oil tank or pressurized systems may explode: therefore, make sure
that you do not come in contact with the leaking liquids.
DISMANTLING AND DISPOSAL
The machine does not contain any health or environmentally harmful substances, since it was
built entirely from materials that are recyclable or can be disposed of in the normal way.
For disposal, you should consult specialist firms or a qualified professional who is aware of the
possible risks, has read these instructions and follows them carefully.
If the machine has reached the end of its service life, the following approach is adopted in
compliance with all industrial safety standards specified:
Interrupt the power supply (electric or PTO),
Disconnect all power cords and transfer to a specialized collection point by following the latest
relevant national provisions.
Empty the oil tank; deliver the oil in sealed containers to a collection point by following the latest
relevant national provisions.
Deliver all other parts of the machine to a scrap collection point by following the latest relevant
national provisions.
Make sure that each and every part is disposed of in compliance with the latest relevant national
provisions.
RESIDUAL RISKS
The machine has been built in accordance with the state of the art and recognized safety
standards. Nevertheless, individual residual risks can occur when working.
Risk of injury to fingers and hands from the splitting tool when improperly leading or supporting
the wood.
Injuries from flying workpiece due to improper guidance or support.
Risk of electric shock when using improper mains supply cables.
Furthermore, latent residual risks can persist in spite of all measures adopted.
Residual risks can be minimized if safety instructions and proper use as well as the operating
manual are followed altogether.
TRANSPORTATION/STORAGE
Transport with forklift trucks/lifting carts:
Before delivery, the machine should be secured with steel tapes and securely mounted on a pal-let.
The machine is protected by a plastic sheet.
To lift it off the pallet, several persons or technical resources are required.
NOTE: The center of gravity of the log splitter is high risk of tipping over!
Transport by crane:
06
Loading ...
Loading ...
Loading ...