Loading ...
Loading ...
Page 3
Special Symbols
The following are examples of symbols used on the UPS or accessories to alert you to important
information:
RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of electric shock symbol.
Important instructions that must always be followed.
Do not discard the UPS or the UPS batteries in the trash.
This product contains lithium-ion batteries which should be recycled in accordance with local
regulations.
Information, advice, help.
FCC Class B
Certification Standards
• UPS directives: UL 1778 5
th
edition (UL listed).
• Performance: IEC 62040-3: 2001.
• Radiated emission: FCC CFR 47 part 15 subpart B, Class B.
• Surges withstand ability: IEEE ANSI C62.41 Category A2 (UL Listed).
• battery certification standards:UN 38.3,UL 1973,IEC 62619.
The crossed-out wheeled bin symbol indicates that waste electrical and electronic equipment
should not be discarded together with unseparated household waste, but must be collected
separately. The product should be handed in for recycling in accordance with the local environ
-
mental regulations for waste disposal. By separating waste electrical and electronic equipment ,
you will help reduce the volume of waste sent for incineration or land-fills and minimize any
potential negative impact on human health and environment.
Li-ion
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: (EATON, 5P1500R-L)
Responsible Party - U.S. Contact information
Applicant: Eaton Corporation
Address: 8609 Six Forks Road, Raleigh, NC 27615, USA
Phone Number: 800-356-5794
FCC Compliance Statement (FCC part 15 subpart B CLASSB）
This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Loading ...
Loading ...
Loading ...