Loading ...
Loading ...
Loading ...
Installation
Instructions Range
I If gou have questions, call 800.GE.CARES or visit our Website at: ge.com I
IN THE COMMONWEALTH OF
MASSACHUSETTS
• This product must be installed bg a licensed
plumber or gas fitten
• When using ball-tgpe gas shut-off valves, theg
shall be the T-handle tgpe.
• A flexible gas connector, when used, must not
exceed 3 feet.
BEFOREYOU BEGIN
Read these instructions completelg and
carefullg.
Installation of this range must conform with
local codes, or in the absence of local codes,
with the National Fuel Gas Code, ANSI
Z223.1/NFPA.54, latest edition. In Canada,
installation must conform with the current
Natural Gas Installation Code, CAN/CGA-B149.1
or the current Propane Installation Code,
CAN/CGA-B149.2, and with local codes where
applicable. This range has been design-certified
bg CSA International according to ANSI Z21.1,
latest edition and Canadian Gas Association
according to CAN/CGA-I.1 latest edition.
As with ang appliance using gas and generating
heat, there are certain safetg precautions gou
should follow. You will find these precautions in the
Important Sofetg Information section in the front
of this manual. Read them carefullg.
• IMPORTANT - savetheseinstructions
for local inspector's use.
• IMPORTANT - Observeallgoverning
codes and ordinances.
• Note to Installer- Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep these instructions for
future reference.
• Note-This appliance must be properlg
grounded.
• Servicer - The electrical diagram is in an
envelope attached to the back of the range.
• Skill Level - Installation of this appliance
requires basic mechanical skills.
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warrantg.
27
Loading ...
Loading ...
Loading ...