Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/73498346-wp-582/bg8.png)
88
Plaque Seeker™ Tip
To use the Plaque Seeker™ tip, place the tip close to the teeth so that the bristles are gently touching the teeth.
Gently glide tip along gumline, pausing briey between teeth to gently brush and allow the water to ow between the teeth.
Travel Water Plug
When traveling, place travel plug in unit to keep excess water from draining out.
NOTE: Do NOT run unit while travel water plug is in unit.
Using Mouthwash and Other Solutions
Your Waterpik® Water Flosser can be used to deliver mouthwash and antibacterial solutions. For ease of adding other solutions
remove the reservoir (see “When Finished” section) and add from top opening on reservoir. If you are adding additional water you
may replace the reservoir and ll reservoir fully with the ll door. Aer using any special solution, rinse unit to prevent clogging by
partially lling reservoir with warm water and running unit with tip pointed into sink until unit is empty.
Cleaning
Never immerse unit in water. Before cleaning, unplug from the electrical outlet. Clean the product when necessary by using a so
cloth and mild non-abrasive cleanser to wipe exterior.
The water reservoir is removable for easy cleaning and is top rack dishwasher safe. It is recommended that the reservoir is removed
and cleaned weekly.
Removing Hard Water Deposits / General Cleaning
Hard water deposits may build up in your unit, depending on the mineral content of your water. If le unattended, it can hinder
performance.
Cleaning internal parts: add 1 tablespoon of white vinegar to a full reservoir of warm water. Point the handle and tip into sink.
Turn unit ON and run until reservoir is empty. Rinse by repeating with a full reservoir of clean warm water.
This process should be done every 1 to 3 months to ensure optimal performance.
CLEANING AND TROUBLESHOOTING YOUR WATERPIK® WATER FLOSSER
Remove
Loading ...
Loading ...
Loading ...