Makita XPH12R User Manual

Loading ...

7 ENGLISH

CAUTION: Always set the speed change lever

fully to the correct position. If you operate the

tool with the speed change lever positioned halfway

between the "1" side and "2" side, the tool may be

damaged.

CAUTION: Do not use the speed change lever

while the tool is running.Thetoolmaybedamaged.

Displayed

Number

Speed Torque Applicable

operation

1 Low High Heavy load-

ing operation

2 High Low Light loading

operation

Tochangethespeed,switchoffthetoolrst.Pushthe

speed change lever to display "2" for high speed or "1" for

low speed but high torque. Be sure that the speed change

lever is set to the correct position before operation.

If the tool speed is coming down extremely during the

operation with display "2", push the lever to display "1"

and restart the operation.

Selecting the action mode

CAUTION: Always set the ring correctly to

your desired mode mark. If you operate the tool

with the ring positioned halfway between the

mode marks, the tool may be damaged.

CAUTION: When you change the position

from " " to other modes, it may be a little dif-

culty to slide the action mode changing ring. In

this case, switch on and run the tool for a second

at the " " position, then stop the tool and slide

the ring to your desired position.

►1.Actionmodechangingring2.Adjustingring

3. Graduation 4.Arrow

Thistoolhasthreeactionmodes.

•

Drilling mode (rotation only)

•

Hammer drilling mode (rotation with

hammering)

•

Screwdriving mode (rotation with clutch)

Selectonemodesuitableforyourwork.Turnthe

action mode changing ring and align the mark that you

selected with the arrow on the tool body.

Adjusting the fastening torque

►1.Actionmodechangingring2.Adjustingring

3. Graduation 4.Arrow

Thefasteningtorquecanbeadjustedin21levelsby

turningtheadjustingring.Alignthegraduationswiththe

arrow on the tool body. You can get the minimum fas-

tening torque at 1 and maximum torque at 21.

Before actual operation, drive a trial screw into your

material or a piece of duplicate material to determine

which torque level is required for a particular applica-

tion.Thefollowingshowstheroughguideoftherela-

tionship between the screw size and graduation.

Graduation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Machine screw M4 M5 M6

Wood

screw

Soft wood

(e.g. pine)

– ɸ3.5 x 22 ɸ4.1x 38 –

Hard wood

(e.g. lauan)

– ɸ3.5 x 22 ɸ4.1x 38 –

Loading ...

Makita XPH12R 18V LXT Lithium‑Ion Compact Brushless Cordless 1/2" Hammer Driver‑Drill Kit 2.0Ah

User Manual - Page 7