Loading ...
Loading ...
Loading ...
Programmable functions
69
Control panel switch-off
status
To save energy, the time display and
the sensors will go out once the
programme has been running for
10minutes. In this case, Start/Add
laundry will flash on and off in the
display.
However, the display/sensors will not
go off in the event of a fault.
Options
= Off
The time display and the
sensors do not go out.
= On (factory default setting)
The time display and the
sensors will go out once the
programme has been running
for 10minutes.
Switching the display back on
- Touch the sensor. This does not
affect the drying programme that is
currently running.
Memory
You can set the following: The
electronics will save the drying level
and any options selected for the
current drying programme. They will
also save the duration of the Warm air/
DryFresh programme. The next time
the programme is selected, these
saved settings will appear in the
display.
Options
= Off (factory default setting)
= On
Anti-crease
After the programme has finished, the
drum will continue to rotate at intervals
for a max. of 2 hours. This helps
prevent creasing if the laundry is not
removed immediately after the end of
the programme. The duration can be
shortened.
Options
= no Anti-crease
= 1 hour
= 2 hours (factory setting)
Loading ...
Loading ...
Loading ...