Loading ...
Assembly:
Fasten the leg stands to the leg base plates.
Use (2) screws and (2) washers per assembly and tighten
securely.
The leg base plates have pre-drilled holes for you to insert
the leg stands towards the edge of the metal supports.
The secondary device plate is adjustable so you can use the
tray for different sized equipment.
*Leave the tightening knobs loose until the final steps of
assembly. Once the unit is fully assembled, you can securely
tighten.
The assembled leg stand and leg base plates then connect to
the laptop holding arms. Use one of the screw knobs and
support poles to fasten the laptop holding arm.
The screw knob fastens to the outside of the laptop
holding arm, while the support pole stretches toward
the other accommodating leg stand / leg base plate
assembly.
*Do not tighten the screw knob to the support pole tightly,
as you will need to slide in the secondary device plate.
Use the optional included support pole extensions, if you
decide to extend the length of your secondary device plate.
The support pole extensions screw into the end of the
support poles.
www.PyleAudio.com
Loading ...