Loading ...
Loading ...
Loading ...
22
Britax Child Safety, Inc.
22
Adjusting Buckle Position
Removing the Buckle
1� Unbuckle the harness by
pressing the release button
and pulling the tongues�
Overhang
Harness Mode
It is important that the base of the child seat rests completely
at on the vehicle seat with no side overhang� It is permissible
to allow up to 3 in� (7�6 cm) of the base to hang over the front
edge of the vehicle seat� If the vehicle seat does not allow
enough of the child seat base to make contact, adjust the
recline angle to a more upright position� Not doing so could
cause the child seat to not perform as intended�
Booster Mode
Overhang is not allowed in booster mode� In booster mode,
the base of the child seat must t completely on the vehicle
seat�
In some cases, the vehicle head restraint
can prevent the child seat head restraint
from being raised high enough to
properly adjust the harness for the t
of your child� DO NOT force the child
seat head restraint past the vehicle head
restraint� Doing so could cause the child
seat not to perform as intended� If the
location of the vehicle head restraint interferes with the
child seat head restraint, raise or remove the vehicle head
restraint� If the vehicle head restraint cannot be removed,
move the child seat to the upright position or try a different
seating location�
WARNING!
Harness Mode
3 in
Booster Mode
Loading ...
Loading ...
Loading ...