Loading ...
Loading ...
Loading ...
12 Philips · NeoPix 730
Connect to wired speakers
or headphones
You can connect wired speakers or headphones
to the projector. With this connection, audio
from the projector is played through the
external speakers or headphones.
• The internal speakers of the projector
are deactivated automatically when
external speakers or headphones are
connected to the projector.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the projector.
Do not use the projector over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.
1 Using a 3.5 mm audio cable, connect the
jack on the projector to the analogue audio
input (3.5 mm jack, or red and white jacks)
on external speakers. Or connect the jack
on the projector to headphones.
USB
USB-C
HDMI
TM
1 HDMI
TM
2
2 After connecting the speakers or
headphones, press the volume control
buttons on the remote control to adjust the
volume to the desired level.
5 Change projector
settings
This section helps you change the projector
settings using the settings menu.
1 Press on the remote control to access
the projector's settings menu.
2 Use the navigation buttons and the OK
button to select a menu item. Press to
return to the previous level of the menu
tree.
3 Press / or / to select a value for the
menu item.
4 Press the OK button to make the change.
Note: For some menu items such as Digital
Zoom, the change takes effect once you
select a different value.
5 Press to exit the projector's settings
menu.
Input source settings
You can view and change the following input
source settings.
• HDMI1: Select this to use the device
connected to the projector's HDMI™ 1 port
as the input source.
• HDMI2: Select this to use the device
connected to the projector's HDMI 2™ port
as the input source.
• USB-C: Select this to use the device
connected to the projector's USB-C port as
the input source.
• EasyLink (CEC): Choose to enable or
disable HDMI™ CEC (Consumer Electronics
Control). The default value is Enabled.
• HDMI Mode: Choose which HDMI™ mode
to use.
• Normal (Video): Use the normal video
range (16-235) commonly used with
most media devices.
• Extended (PC): Use the extended video
range (0-255) used with PC devices.
Loading ...
Loading ...
Loading ...