Loading ...
Loading ...
Loading ...
Frequently Asked Questions
41
With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.
This guide may help you to find the reason for the fault, and how to correct it.
Problem Possible cause and solution
The drawer does not
heat up.
The electrical plug is not properly inserted.
Insert the electrical plug.
The breaker has tripped.
Reset the breaker (see data plate for the correct
fuse rating). If, after turning the breaker or GFCI
back on, the drawer will still not turn on, contact a
qualified electrician or Miele Customer Service.
Noise occurs during op-
eration
The noise is caused by the fan, which distributes
the heat evenly throughout the drawer. This is not a
fault.
The food is not hot
enough.
The “Keep Warm” mode is not set.
Set the correct operating mode.
The temperature setting is too low.
Select a higher temperature.
The air vents are covered.
Make sure that air can circulate freely.
The food is too hot. The “Keep Warm” mode is not set.
Set the correct operating mode.
The temperature setting is too high.
Select a lower temperature.
The dishware is not hot
enough.
The Warm Dishes/Plates operating mode was not
selected.
Set the correct operating mode.
The temperature setting is too low.
Select a higher temperature.
The air vents are covered.
Make sure that air can circulate freely.
The dishware has not been warmed long enough.
The heating time for dishware is affected by a
number of factors (see “Heating dishware”).
Loading ...
Loading ...
Loading ...