Loading ...
Loading ...
Loading ...
64
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
TITLE
SIZE
Customer
DWG NO
REV
SCALE SHEET
Finish
N/A
B
-
Engineering Release
01/01/2020
Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8
P: (519) 751-1800 www.crownverity.com
1:7.5
2 of 2
-
Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY:
Todd Stone
Material
SS 304
01/01/2020
Dimensions are in inches
Linear Tolerance: +/- .015
Bend Tolerance: +/- .020
Angular Tolerance: +/- 0.5
Radial Tolerance: +/-.005
Copyright 2020 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
D
E
F
Detail D
SCALE 1 : 1.88
Detail E
SCALE 1 : 1.88
Detail F
SCALE 1 : 1.88
TYPICAL 4 PLACES
Storage cabinet
shown with front door
and cutting board
removed for clarity
Storage cabinet shown
with back panel
removed for clarity
The end panel bracket
shown is positioned behind
the formed flange of the end
panel when installed.
The end panel bracket connects the
rear of the storage cabinet to the
end panel at this position. The
bracket hooks behind the panel
and is bolted in place from the front.
The end panel bracket is attached to the back
of the storage cabinet at this position. Ensure
the end panel is pushed tight against the side of
the storage cabinet before tightening the bolt.
The end panel is attached to the storage
cabinet four places. Position the
hardware but do night tighten it until the
end panel is aligned with the cabinet.
End Panel to Storage Cabinet
with Cutting Board Option
IB-EP-ICM
End panel bracket is
installed with hardware
provided from the inside
of the cabinet as shown
Storage cabinet
shown with end panel
removed for clarity