Loading ...
Loading ...
Loading ...
Assembly Procedure
Step 11.
The BBQ is intended to be used with a standard 9kg ULPG cylinder. This is the type of cylinder that can be
refilled at petrol station or swapped for similar cylinder.
Place the cylinder in position on the gas bottle bracket of the BBQ, under the left hand side burner, so that the
bracket sits through the neck of the cylinder, allowing it to hang.
Turn the fitting in an anti clockwise direction and hand tighten as much as you can. This should seal it
sufficiently.
Step 12.
Finally, take the hose clamp and slide the hook end through the slot in the leg panel. Clip around the hose as
per below.
It is important to conduct a leak test prior to use. Follow leak test procedure. (Procedure located on Page 2
of this manual)
Page 17
Important: Check the hose is routed as per
drawing. The hose must not be kinked.
Hose Clamp
Loading ...
Loading ...
Loading ...