9P5034C1 Magnavox projection television

User Manual - Page 35

For 9P5034C1.

PDF File Manual, 51 pages, Download pdf file

Loading ...
Loading ...
Loading ...
l
y;ur TV remote can be set to
ork various accesso_
devices (VCRs. Cable Converters,
Satellite Receivers) by what is
called the SEARCH method.
Note: The Search Method only
works with devices equipped with
Channel Display Indicators or
capabili_. If the "Direct Access"
code number method (shown in
the previous section) did not set
your remote to work your acces-
so_ device, then follow the easy
steps listed below.
<_ Turn ON the desired device.
I Press the correct VCR or ACC
system button on the remote.
<_ Stand at least away
six feet
from the front of the accessory
device. Point the remote toward
the unit. HOLD DOWN the
SURF and the desired System
(VCR or ACC) buttons at the
same time. KEEP HOLDING
BU'IffONS DOWN.
@Watch the Channel Indicator
on the unit. Channel Numbers will
SCAN UP when the unit has been
identified. This may take up to
two minutes.
_ Release the SURF and System
(VCR or ACC) buttons as soon
as channel numbers start to scan
up. The code has been identified
and the remote is ready to operate
with the accessory device.
O
Remember, a minute or two
g can seem very long, but the
code should be located within two
minutes.
Don't let the accessory device scan up
more than five channels. The remote
may pass up the right code and another
two minute search cycle will have to
be repearzd.
If no channel change happens within
two minutes, repeat steps I-4, Should
a channel change still not occur, the
remote will not work with the desired
unit.
SATELLITE RECEIVER
VCR
CABLETV
CONVERTER
o91
09
Six Feet
(minimum)
36
Loading ...
Loading ...
Loading ...