Loading ...
Loading ...
Loading ...
8
3. Features
1
Primary Input
Models PDUMH15HVAT/NET: The C13-C14 cord is detachable.
Models PDUMH20HVAT, PDUMH20HVAT1, PDUMH20HVATS, PDUMNH20HVAT1,
PDUMH20HVATNET: The C19-C20 cord is detachable.
2
Secondary Input Inlet (detachable on all models)
Models PDUMH15HVAT/NET: The IEC-320-C14 inlet connects to the detachable Secondary
AC Input Power Cord.
Models PDUMH20HVAT, PDUMH20HVAT1, PDUMH20HVATS, PDUMNH20HVAT1,
PDUMH20HVATNET: The IEC-320-C20 inlet connects to the detachable Secondary AC Input
Power Cord.
3
Switched Outlets: During normal operation, the outlets distribute AC power to connected
equipment. These outlets may be switched On and Off via software control. When an outlet is
live, the associated LED illuminates.
4
Unswitched Outlets: These outlets receive power from either input source, but are not
individually switchable.
5
Factory Configuration Port: The port is reserved for configuration by factory authorized
personnel only. No user information is available. Connecting to this port may render the unit
inoperable and void its warranty.
6
Digital Load Meter (Ammeter): The total electrical current used by the connected equipment
is displayed on the digital meter in amperes.
Input Voltage Range Select Switch: The button to the lower left of the display may be used
to toggle between “HI” or “LO” voltage ranges. The display will indicate “HI” or “LO” for five
seconds. Press the switch once to display ranges. Press again within five seconds to change
setting. Setting can also be changed via PowerAlert (PDUMH15HVATNET and
PDUMH20HVATNET only).
IP Address Display (Models with SNMP card installed only): Press and hold the switch to
display the IP address of the SNMP card in the PDU.
7
Network Interface (Models with SNMP card installed only): Allows you to operate the PDU
as a managed network device, accessible via SNMP network management platform, web
browser, SSH or Telnet.
8
Input Source Indicator: When the PDU is connected to a live AC power source, the Primary or
Secondary input LED illuminates to indicate which source is supplying power to the outlets.
Loading ...
Loading ...
Loading ...