SMUG TASK CHAIR Desk Chair, Swivel Computer Office Mesh Desk Chair Armless Office Chair Small Desk Chair Adjustable Black Computer No Armrest Mid Back Home Office Chair

Product's Documents

Below are documents related to this product, you can read online or download:
TASK CHAIR photo

User Manual

This is the main product document for model TASK CHAIR.

The file format is pdf, 10 pages, you can download this manual here .

background
INSTRUCTION MANUAL
background
ASSEMBLY GUIDE
Congratulations, you are now the owner of a brand new ergonomic chair!
To best enjoy the comfort of the chair, you have to put it together first! This assembly
guide will take you through the assembly process. To make sure the assembly goes
well, please follow the instructions, and especially the important safety information.
It is possible to assemble the chair on your own, but it is recommended to have
a second person to make it easier and safer.
Please check if there are any missing parts from the package before starting. If there
is any issue, please don't hesitate to drop us an email and we'll help you out ASAP.
If you run into any difficulty when assembling the chair, remember to check out the
assembly video to see if you've missed anything. If you're unable to resolve the proble m,
just send us an email and our support team will assist you.
WARNING
To ensure proper assembly, please follow all steps and use all parts. Failure to
follow this warning can result in serious injury to yourself or others.
2
background
Package List
Without further ado, we kindly suggest you to list all parts needed
for the chair first.
3
Back
Base
Gas Lift
Bolts
Wrench
Casters
(1)*1 (2)*1 (3)*1
(4)*1 (5)*5 (6)*2
(7)*1
Seat
background
Assembly Instruction
Step 1:
Press the Casters (5) into the
holes at the end of each Leg
of base (4).
And then insert the Gas Lift
(3) into the ce nter hole of
the Base.
Connect the seat (1) and back
(2) with the bolts (6), tight
the bolts with Wrench (7).
Step 2:
1
2
4
(3)
(4)
(5)
Tips:
Don’t making the caster go
vertical to the hole, it will
be easily for installation if
make it has a little angle.
(1)
(6)×2
(2)
background
Insert the seat into the Gas Lift (3).
Finish the installation.
3
4
5
Make sure all bolts and screws are fully tightened before using chair.
Lubricate all moving parts and tighten all bolts/screws every 6 months
or whenever needed.
CAUTION:
5
Step 4:
Step 3:
(3)
background
Instructions For Use
7
1. Seat Height: Paddle-shaped lever on the right side
To lower:
While seated, lift lever up.
To raise:
While taking your weight off chair,
lift lever up.
* At the proper height, your feet should rest flat on the floor.
6
background
Safety And Maintenance
Safety Information
9
Do not stand on the chair, Do not use the chair as a stepladder.
Use this product for seating one person at a time.
Do not use the chair unless all bolts and screws are firmly secured.
Avoid contact with sharp objects to prevent puncturing the fabric.
Every 6 months, check all bolts and screws to ensure they are tight.
To clean, spot clean only using a damp towel and mild cleaner, first
test on a small, unseen area of fabric.
Chair weight limit not to exceed 250 lbs.
Sit in the center of the
chair, with your back to
the backrest
Do not push the chair
around when a person
is sitting in it
Do not push down on
the backrest when a
person is reclined
Do not place all your
weight on only the
backrest
Do not sit at the front
edge of the chair
Do not stand on the
chair
Do not use the chair
with more than one
person
7
background
Limited Warranty
10
The producer promises to repair or replace any chair that is found to be
defective in material or workmanship within one(1) and year from the date
of original purchase so long as you, the original purchaser, still owns it.
This is your sole and exclusive remedy. This warranty is subject to the
provisions below.
This warranty does not apply and no other warranty applies to:
Normal wear and tear, which are to be expected over the course of
ownership.
Misuse, abuse, or excessive use of the product.
Modifications or attachments to the product that are not approved
by the manufacturer.
Products that were not installed, used or maintained in accordance
with product instructions and warnings.
Products used for rental or commercial purposes.
Damage caused by the carrier in-transit is handled under separate terms.
Normal use for seating is identified as the equivalent of a single shift,
forty- (40) hour workweek. To the extent that a seating product is used
in a manner exceeding this, the applicable warranty period will be
reduced in a pro-rata manner.
Some retailers might have custom models imported directly from the
factory and therefore are not supported by our local service team
because we don’t have the correct parts, please contact your retailer
directly for support. If you have any questions about that we will be
happy to assist and identify those items.
EXCLUSIONS:
SEATING USAGE:
8
background
We adopt a 30 days return policy which means that all products purchased
on this website may be returned to us within the timeframe. You need to
contact us within 30 days after the product(s) came into your possession
and the product(s) must be returned to us without any undue delays.
Returned products must be returned in the same condition as they were
sent and they must be sent in its original packaging.
If the product is not faulty, (i.e. if you changed your mind or if you are
unhappy with the product for some other reason), the cost of shipping
will all on you. And it is your responsibility that the package arrives safely
to us so we recommend that you use a courier service where it is possible
to track the shipment.
If the product is faulty when you receive it please contact us and we will
help you out (see more information under Manufacturer Warranty).
We reserve the right to give a partial refund in cases when the product(s)
is not in an unused condition, is damaged or has missing parts not due
to our error.
Contact us through the contact form on our website and attach the invoice
to the message as proof of purchase. And please also write the reason for
the return.
We will then get back to you as soon as possible with information on where
to send the product(s).
As soon as we have received the product(s) and made an inspection we will
inform you of our decision.
If a refund is approved we will automatically credit the purchase to your
credit card or original method of payment.
If the product(s) is damaged, not in its original condition or missing parts
we will inform you if you are eligible for a partial refund. This is decided
from case to case depending on the severity of the damages or what parts
are missing.
RETURN POLICY
HOW RETURNS WORK
9
background

Specifications

SMUG TASK CHAIR Questions and Answers