Loading ...
Loading ...
Loading ...
INSTALLATION MANUAL
INSTALLATION
11
Prepare the Hood
1 ] If present, remove all protective polyfilm from the hood and/or parts.
2 ] Using the finger cup or the tab (CRSA1 Series only), remove the grease filter(s) from the
hood by pushing down and tilting filter(s) out .
3 ] Remove the EZ1 brackets from inside the hood by cutting off the tie wrap (no EZ1 brackets
in CRSA1 Series). Remove both screws holding damper assembly to hood. Remove parts
bag (captured behind the damper assembly). Remove damper assembly from inside the
hood and keep the screws for further use.
4 ] Remove the wiring cover (shaded part on illustration below) by sliding it out from the hood
and set it aside.
NOTE: Since this manual covers many range hood models, some details in the following
illustrations may sligthly differ from your unit.
B
C
DAMPER
ASSEMBLY
SCREWS
EZ1
BRACKETS
Loading ...
Loading ...
Loading ...