Loading ...
Loading ...
Loading ...
16
EN
To prevent siphoning, one of the following
methods must be used.
Method 1
When the drain hose is connected to a waste
spigot, the hose must be looped up to the
underside of the bench top and secured.
300 mm Min.
770 mm – 1000 mm
Method 2
When the drain hose is connected to a
separate standpipe, it is essential that an
airtight connection be made. If not, it can
induce odors.
700 mm Min.
1000 mm Max.
300 mm Min.
Air Tight Air Tight
ConnectionConnection
Standpipe 40 mm Standpipe 40 mm
diametre Min.diametre Min.
Connecting the Water Supply
Hose
Connect the water supply hose to the water
tap.
WARNING
• Do not shorten or damage the water supply
hose as it contains electrical wires and
components. It can not be detached or
removed from the appliance for installation
purposes.
• It is important that the water supply hose not
be tampered with, cut, disassembled, pulled,
or kinked. It contains electrical wiring inside
and if damaged, can cause an electrical
hazard.
CAUTION
• Only use the threaded nut of the water supply
hose to tighten it to the tap.
• Do not twist or kink the water supply hose
when connecting it to the tap.
Water tapWater tap
Water supply hoseWater supply hose
Bench topBench top
Loading ...
Loading ...
Loading ...