User Manual Pyle PHLTB41BK Ultrasonic Wave Electric Toothbrush

Documents for Pyle PHLTB41BK

The following documents are available:
User Manual Photos
PHLTB41BK photo
188mm
95mm
BRUSHING TECHNIQUE:
Guide the brush head slowly from tooth to tooth.
Hold the brush head in place for a few seconds before
moving on to the next tooth.
Brush the gums as well as the teeth. Start with the outside
of the teeth, then the insides ending with the chewing
surfaces.
Do not scrub or press hard, simply let the brush do all the
work.
BRUSHING MODES
The PHLTB41BK oers dierent brushing modes for
varying oral care needs:
Normal - Exceptional mouth cleaning
Whitening - Gentle, yet thorough cleaning for sensitive
areas
Massage - Gentle stimulation of gums
TWO MINUTE AUTO-TIMER:
The PHLTB41BK has been carefully designed to clean teeth
thoroughly and safely. After two minutes of operation the
device powers o automatically.
HOW TO SWITCH BETWEEN BRUSHING MODES:
Power On/Oand brushing mode selection are controlled
by the brushing mode button (c). keep pressing this
button, the operating sequence is power on, in Normal
mode then Whitening mode, then Massage mode, end
power o. The device will trun of if any mode work over 5
Sec.
The
PHLTB41BK automatically starts in the Normal mode
when pressing the brushing mode button once.
To shift from Normal mode to Whitening mode, press the
brushing mode button a second time.
If you wish to use the Massage mode, press the brushing
mode button one more time.
When you press the brushing mode button, the brushing
mode indicator will be lit, indicating the selected working
mode.
To turn your brush off, press the brushing mode button; if
the sonic smile brush handle is on Normal mode, you need
to press the button three times to
power off the device. If the sonic smile brush handle
is in Whitening mode, you need to press the button twice
to power off the device. If the sonic smile brush handle is
on Massage mode, you need to press the button once to
power o the device.
CLEANING RECOMMENDATIONS:
After brushing, rinse your brush head thoroughly under
running water.
Remove the brush head from the handle and clean both
parts separately under running water. Then wipe them dry
before you put the handle onto the charging unit.
Before cleaning your charging unit, make sure you unplug
the adaptor. Only use a dry or damp-dry cloth to wipe the
surface of the charging unit. Important:
Do not clean the charging unit by immersing it under
running or still water.
Place the charging unit onto a dry and safe place.
Do not plug in the charging unit until it is completely dry.
This product contains rechargeable batteries in the
interest of protecting the environment.
Loading ...
Loading ...
Loading ...