Loading ...
Loading ...
Loading ...
6
IMPORTANT: This kettle is fitted with a concealed element, it must
be descaled regularly. The frequency of descaling depends on
usage and the hardness of the water in your area.
Excessive scale can cause the kettle to switch off before boiling
and may damage the element voiding the warranty.
Half fill the kettle with tap water and add the juice of 1 lemon to the
water. Boil this mixture and allow it to stand for 15 minutes. Re-boil
the mixture and allow it to stand a further 15 minutes. Re-boil this
mixture a third time and rinse the kettle well.
DESCALING
1. Open the lid.
2. Lift the filter upwards from its holder.
3. To re-fit the filter, slide it into the side wall guides of the filter
holder until it clicks into place.
WARNING: Unless the filter is fitted correctly, the kettle lid may
not close and lock securely.
FILTER REMOVAL
5. Plug the cord into a power socket and switch on at the wall.
6. Switch the kettle on. The ‘power on’ light will illuminate.
7. Rapid boil kettles perform differently, they may sound louder during
boiling, and switch off suddenly with no after noise, this is normal.
8. When the water boils the kettle will switch off automatically.
If you are using the kettle for the first time, pour away the boiled
water.
9. Lift the kettle from the power base by the handle ensuring you hold
the kettle level. To re-boil, switch ON again. If the kettle has just
switched off wait a minute or two before switching it back on again.
If you do not put in enough water, or switch on the kettle when it is
empty, the safety cut-out will switch off the power automatically. If
this happens, refill and wait a few minutes for the element to cool,
then use as normal.
Loading ...
Loading ...