Ancona AN1341 User Manual

Loading ...

— 11 —

Installation

STEP 6

Preparations

NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.

• Determine and mark the center line on the ceiling or wall where the range hood will be installed.

• Make sure there is proper clearance within the ceiling or wall for exhaust vent.

• Duetotheweightandsizeofthisunit,pleasemakesurethatthesupportsystemorframeworkbeingusedisstableand

secure in the ceiling or wall.

• Put a thick, protective covering over countertop, cooktop or range to protect from damage or dirt.

• Removeanyhazardousobjectsaroundtheareawheninstalling.

CAUTION

If moving the cooking range is necessary to install the hood, turn OFF the power on an electric range at the main

electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

Figure 2

STEP 7

Preparing the Cabinet

• Measure and cut an opening at the bottom of the cabinet to t the

motor box of the range hood (see Figure 1A, 1B or 1C).

• Measure and cut a hole in the top of cabinet to t the duct tube (see

Figure 2).

• Note that the hole in the top of the cabinet may not be necessary

depending on venting method chosen (see Page 10).

STEP 8

Attaching Damper Flap

• Fixthedamperapintothedamperholeontopoftherangehood

motor box (see Figure 3).

Figure 3

Figure 1A Figure 1B

10.6 in. (27 cm)

19.6 in. (50 cm)

10.6 in. (27 cm)

28.75 in. (73 cm)

20.5 in. (52 cm) 29.5 in. (75 cm)

Figure 1C

10.6 in. (27 cm)

32.6 in. (83 cm)

33.5 in. (85 cm)

Loading ...

Ancona AN1341 Stainless Steel Ducted Under Cabinet Insert