Loading ...
Loading ...
Loading ...
Figure 14
Figure 15
All blades are grouped by weight. Because natural
woods vary in density, the fan may wobble even
though the blades are weighed equally.
The following procedure should correct most fan
wobbling problems. Check after each step.
1. Check that all blade and blade arm screws are secure.
2. Most fan wobbling problems are
caused when blade levels are unequal.
Check this level by
selecting a point on the ceiling above the
tip of one of the blades. Measure this
distance as shown in Figure 16. Rotate the
fan until the next blade is positioned for
measurement. Repeat for each blade. The
distance deviation should be equal within
1/8".
3. Use the enclosed Blade Balancing Kit if
the blade wobble is still noticeable.
4. If the
blade wobble is still noticeable,
interchanging two adjacent (side by side)
blades can redistribute the weight and
possibly result in smoother operation.
Attach the metal cover and rotate clockwise until it
goes all the way up and is tighten (Figure 15).
Hanger
bracket
Screw
Canopy
Decorative
cover
Metal cover
7.
Finishing the Installation
Installing the Metal Cover
Step 1. Tuck connections neatly into ceiling outlet
box.
Step 2. Slide the canopy up to mounting bracket and
place the key hole on the canopy over the screw on
the mounting bracket, turn canopy until it locks in
place at the narrow section of the key holes. (Fig. 14)
Step 3. Align the circular hole on canopy with the
remaining hole on the mounting bracket, secure by
tightening the two set screws. Note: Adjust the
canopy screws as necessary until the canopy and
canopy cover are snug.
WARNING
Make sure the notch on the hanging bracket properly
sits in the groove in the hanger ball before attaching
the canopy to the bracket by turning the housing until
it drops into place.
Blade Balancing
Touching
ceiling
Figure 16
WARNING
TO REDUCE THE RISK OF PERSONAL
INJURY, DO NOT BEND THE BLADE
HOLDERS WHILE INSTALLING,
BALANCING THE BLADES, OR CLEANING
THE FAN. DO NOT INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN
BLADES.
Loading ...
Loading ...
Loading ...