Fanimation FP8519BL Henry 20-in Black LED Indoor/Outdoor Cage Ceiling Fan with Light Remote 3-Blade

Installation Manual - Page 8

For FP8519BL.

PDF File Manual, 38 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Motor Coupling
Cover
Ceiling Canopy
Canopy Screw
Cover
5. Route wires and safety cable through motor coupling
cover, canopy screw cover and ceiling canopy.
(Figure 5)
6. Reinstall the hanger ball on the downrod as follows.
Route the black, white and blue wires and safety cable
through the hanger ball. Position the pin through
the two holes in the downrod and align the hanger
ball so the pin is captured in the groove in the top
of the hanger ball. Pull the hanger ball up tight
against the pin. Securely tighten the set screw in the
hanger ball. A loose set screw could create fan
wobble. (Figure 6)
8
How to Assemble Your Ceiling Fan (continued)
7. Cut off excess lead wire approximately 6 to 9 inches
above top of the downrod. Strip insulation off 1/2 inch
from the end of each lead wire. (Figure 7)
NOTE:
All set screws must be checked, and retightened
where necessary, before installation.
Figure 6
Figure 7
Figure 5
Loading ...
Loading ...
Loading ...