Loading ...
Loading ...
Loading ...
6
Features
Output Circuit Breakers: Two circuit breakers (one per
outlet bank) protect connected equipment against
dangerous system overloads. If the total load on either of
the PDU's outlet banks exceeds 20 amps (PDUMH30NET &
PDUMH32HVNET) or 15 amps (PDUMH30HVNET), the
associated circuit breaker will trip, cutting power to the
entire outlet bank. Reduce the load on the outlet bank by
unplugging some equipment, then press the circuit breaker
in/set to the ON position to restore power.
Cord Retention Shelves (Optional): When installed on the
PDU, these shelves provide secure attachment points for
connected equipment power cords. Use the included cable
ties to secure cords to the shelf.
C14 Plug-Lock Insert Sleeve (Optional): Use the included
plastic sleeves to secure C13 power cords to C14 inlets. Fit
the sleeve over the end of the cord, making sure the pull-
tabs remain outside the cord and the fit is secure. To
unplug equipment properly, grip both the cord and the
insert’s tabs at the same time and pull.
C20 Plug-Lock Insert Sleeve (Optional): Use the included
plastic sleeves to secure C19 power cords to C20 inlets. Fit
the sleeve over the end of the cord, making sure the pull-
tabs remain outside the cord and the fit is secure. To
unplug equipment properly, grip both the cord and the
insert’s tabs at the same time and pull.
Mounting Brackets: These detachable brackets enable
the PDU to be installed in a 2U rackmount configuration or
an under-counter configuration.
Factory Port: The port is reserved for configuration by
factory authorized personnel only. Do not connect anything
to the port.
Ground Connection: Use this to connect any equipment
that requires a chassis ground.
WEBCARDLX: Allows you to operate this PDU as a
managed network device, accessible via SNMP network
management platform, web browser, SSH or Telnet.
RESET
STATUS
CONFIG
Loading ...
Loading ...
Loading ...