Loading ...
Safe
BC339
1 YEAR LIMITED WARRANTY
BARSKA warrants this new safe to be free of original defects
in material and/or workmanship under normal use for a
period of twelve (12) months from the date product is
received by purchaser. This warranty does not include
damage caused by improper installation or maintenance.
Damage from misuse, abuse, accident (such as dropping),
normal wear and tear, fire, flood, or acts of nature. Damage
from service or repairs other than those performed by
BARSKA. Labor, cost and shipping charges for the removal
and replacement of defective parts beyond the initial
twelve-month warranty period. All transportation and shipping
charges. Removing or altering the seal under any
circumstances will automatically void the warranty.
This warranty is limited to original purchaser and is not
transferable. This warranty applies only to products
purchased in the United States.
Please email [email protected] or call 1.888.666.6769 for
Return Merchandise Number (RMA#) before any returns. The
RMA number must appear on the outside of the shipping
package. Product must be packed carefully and sturdily in its
original packaging to prevent damage in transit and returned
freight pre-paid to:
BARSKA OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
Please include all of the following when returning BARSKA
products for service and/or replacement:
1. Please write your complete details (Name, Address,
Telephone #, E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order of $40.00 to cover inspection,
shipping and handling.
*Please allow 6-8 weeks for delivery.
BARSKA will examine and test returned product and repair or
replace defective part(s) or units with new part(s) or a new
unit if necessary within the warranty period. Purchaser is
required to remit $40.00 to BARSKA for return shipping and
handling at time product is returned. If repair is required after
warranty period expiration, purchaser will be charged for
replacement parts and return shipping.
BARSKA® Optics shall not be liable for any consequential,
incidental and/or contingent damages whatsoever. We will
not pay shipping, insurance or transportation charges from
you to us, or any import fees, duties and or taxes. This
warranty supersedes all previous BARSKA®
Optics warranties.
Concrete Floor
Wood Floor
Existing Concrete Floor Installation
Measure the outside dimension of the safe body and add 4
inches to ensure enough room for installation of concrete around
the body of safe. Layout and score the area for installation. Use
an electric jack hammer to break throughout the existing concrete
to the desired size. After the concrete is removed, dig out the hole
to accommodate the safe, make the hole at least 3 inches deeper
than the safe size. Pour enough concrete in the bottom of the
hole to form a firm base for the safe to set on level. Insert the
safe on top of the coverer base. Finish filling the hole with cement
and add any reinforcement necessary to maintain position. Finish
off concrete level with the floor. Make sure the top of safe is key
level with the floor. Drill in 4 mounting screws provided into the
mounting holes in the safe.
Wood Floor Installation
Build a retaining form of wood or mesh wire basket lined with
roofing paper and attach to the floor joists, between the floor and
ground. Cut a hole in the floor and set the safe using the same
directions as noted above for concrete floor installation. Reinforce
joists as necessary to compensate for weight. If a wood form is
used, remove wood after cement is sent to prevent pests from
traveling to your structure
New Concrete Floor
Dig ground to provide a form as in concrete floor installation
noted above. Put safe into position in live concrete and adjust to
proper level, etc. prior to finishing of floor. It is better and
recommended to "block out" a hole for the safe, leaving 4 inches
of room on each side to be installed. Install the safe after the
walls and roof are up to eliminate climate damage.