Loading ...
Loading ...
Loading ...
Installation Instructions
CEILING/WALL INSTALLATION:
1. Position the fan in your desired location, ensure you are aware of all existing timer and
electrical cables in walls and ceilings.
2. Mark the surface carefully then cut a circular hole to size. Product dimensions are listed in
data table below. We do recommend you measure the physical product to ensure the hole
being cut is to size and accurate.
3. Remove the front cover of fan.
4. Route the main cable though the cable entry and connect the Live (L) and Neutral (N) cables.
We recommend this is completed by a registered electrician.
5. Fix the unit into position (in the wall, through glass or ceiling) using the 4 mounting screws
on the base of the fan body.
6. The extractor fan should be ventilated to the outside of the house and not into the ceiling
or wall, use ducting and a back draught shutter to suit.
Ceiling Mount
Model Input Power IP Air Volume Cutout Size
GEXSL100 220-240V~ 15W IPX2 80m
3
/h Max 110mm
GEXSL120 220-240V~ 20W IPX2 150m
3
/h Max 130mm
GEXSL150 220-240V~ 25W IPX2 250m
3
/h Max 160mm
Wall Mount
Glass Mount
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
[email protected]om.au
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty, retain receipt as proof of purchase.
Loading ...
Loading ...