Loading ...
Loading ...
Loading ...
,_ WARNING: Be sure no one other than the operator is standing near the lawn mower while starting
engine or operating mower. Never run engine indoors or in enclosed, poorly ventilated areas. Engine
exhaust contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing
away from any moving parts on engine and lawn mower.
1. Push primer three times. Wait about two
seconds between each push. See Figure 7A.
In temperature around 55° F or below, prime
five times. Do not prime to restart a warm
engine.
2. Standing behind the mower, squeeze the
blade control handle against the upper
handle. See Figure 7B.
3. Holding these two handles together firmly,
grasp recoil starter handle and pull rope out
with a rapid, continuous, full arm stroke. See
Figure 7C. Keeping a firm grip on the starter
handle, let the rope rewind slowly. Repeat
until engine cranks. Let the rope rewind each
time slowly.
1. Release blade control handle to stop the
engine and the blade.
2. Disconnect spark plug wire from spark plug
and ground against the engine.
x,, A
Push
release to
prime
Squeeze these
two handles
B C
Pull
starter
Fi ure 7
UsisgYourLaws Me®er
IMPORTANT:Be sure the lawn is clear of stones, sticks, wire, or other objects which could damage the lawn mower
or the engine. Such objects could be accidently thrown by the mower in any direction and cause serious personal
injury to the operator and others.
_ ARNING: If you strike a foreign object, stop the engine. Remove wire from the spark plug, thoroughly
inspect the mower for any damage, and repair the damage before restarting and operating the mower.
Extensive vibration of the mower during operation is an indication of damage. The unit should be promptly
inspected and repaired.
Op®ratisgTips
• For best results, do not cut wet grass.
• New grass, thick grass, or wet grass may require a narrower cut.
• For a healthier lawn, never cut off more than one-third of the total length of the grass.
• Your lawn should be cut in the fall as long as there is growth.
• For effective mulching, do not cut wet grass.
• Adjust ground speed according to the condition of the lawn.
• If the grass has been allowed to grow in excess of 4 inches, mulching is not recommended.
Mow using the side discharge to reduce the grass height to 3-1/4 inches or less before
mulching.
Loading ...
Loading ...
Loading ...