Loading ...
Loading ...
Loading ...
8
8. Set a Desired Humidity Percentage Value
Press Up or Down button repeatedly to set your desired humidity percentage value between
10%-90% in increment of 1%. The digital number that reflects the humidity level will turn to
the previous humidity set-point and then flash when changes are being made.
The set humidity value needs to be at least 5% lower than the room humidity readout value.
After selecting the target value, press OK Button to confirm your setting, or let the setting be
registered automatically in 5 seconds.
NOTE:
＊The dehumidifier with a humidistat will stop and start automatically to maintain room humidity
level within a range of ±3% of the set point.
For example, if the set humidity is 50%,
· when the inlet humidity level the dehumidifier detects is 47%, 3% lower than the set humidity,
the dehumidifier will automatically stop and enter into standby mode where the compressor
stops and the Run icon as well as the humidity readout number flashes.
· then, when the inlet humidity level the dehumidifier detects raises to 53%, 3% higher than the
set humidity, the dehumidifier will automatically restart.
＊If the set humidity value is equal to or higher than the room humidity readout value, the
dehumidifier will not start.
＊If the set humidity level is 10%, the dehumidifier will enter Continuous Mode where the
dehumidifier will run continuously.
9. Timer Setting
The TIMER function enables you to either delay AUTO-ON or delay AUTO-OFF the
dehumidifier in the choice from 1 hour to 24 hours.
· Setting an AUTO-ON timer: When the dehumidifier is off, selecting Timer will turn the
dehumidifier on in the hours that will be set.
· Setting an AUTO-OFF timer: When the dehumidifier is on, selecting Timer will turn the
dehumidifier off in the hours that will be set.
NOTE:
· Before entering the AUTO ON TIMER setting, make sure power is being supplied to the
dehumidifier.
Loading ...
Loading ...
Loading ...