Loading ...
Loading ...
Loading ...
4 BISSELL.ca
Using Your Machine
To purchase additional tools or formulas, visit support.BISSELL.ca.
1. Release the hose by
twisting the secure latch.
2. Attach your desired tool to
the Hose Grip until you hear a
“click”.
3. Twist the Quick Release™
Cord Wrap and unwind the
cord to plug into outlet.
4. Press the Power Button ON. 5. Point the tool approximately
1 inch above the spot or stain
and press the Spray Trigger.
6. Release the Spray Trigger
and use the bristles to scrub the
area. To lift away the stain, apply
downward pressure while moving
the tool slowly toward you.
Before You Clean
1. Vacuum to remove loose dirt from area to
be cleaned.
2. Spray any BISSELL® stain pretreat formula
to soiled areas or stains.
3. Allow to sit for at least 3 minutes.
4. Clean following instructions below.
Choose Your Desired Tool
Tools vary by model.
3" and 4" Tools
Great for carpet
stains, furniture
and other
hard-to-reach
surfaces.
6" Tool
Great for cleaning
stairs and larger
furniture areas.
Crevice Tool
Best for narrow
spaces and
crevices that are
hard to reach.
Deep Stain/Pet Stain Tool
Deep injection technology
cleans the carpet from the
bottom up to quickly and
thoroughly remove stains.
Stain Trapper Tool
Messes are collected
and stored in a separate,
removable container,
keeping pet and other liquid
messes out of your machine.
Attaching and Using the Tools
NOTE: When using the Deep Stain Tool, always keep the tool in direct contact with
carpeting to avoid over-spraying.
HydroRinse™ Self-
Cleaning Hose Tool
Use to clean out your
hose after each use.
3-in-1 Stair Tool
Spray, scrub & suction
stains from the outer
curves, corners &
treads of your stairs.
Loading ...
Loading ...
Loading ...