Loading ...
Loading ...
Loading ...
Installation & Adjustment
Connection between the water inlet hose and the
washer
the nut of the water inlet hose
Thread of the water inlet valve
Water absorption cushion
6
fastened and can be pivoted as required.
Check the inlet hose connections
Water inlet
1. Connect the cold hose (blue connector) to the cold tap
and the hot hose (red connector) to the hot tap. You
may have to use pliers to tighten the coupling. Do not
over-tighten as this may cause damage to the valve or
hose fittings.
2. Connect the other end of the hose to the respective hot and cold
inlet valves located at the rear of the washing machine.
3. We recommend you to replace the inlet hoses every 5 years. Hoses should be
checked from time to time and replaced if any wear, damage or leaks are found.
1. Do not take off the water absorption cushion.
Please check if the cushion is dropped or
damaged before each usage. If this happens,
please contact with after-sales department
immediately.
2. Put the nut of the water inlet hose onto
the inlet valve thread.
3. Fasten the nut.
2. After installation, open the tap to check for leakage.
CAUTION:
1. If the water pressure is too high or too low, the appliance may not be able to operate properly.
2. Ensure the water pressure in the water supply system is at least 30 kPa（1 bar）and a maxmum
of 1 Mpa (10bar).
3. If the water pressure exceeds the maxmum value specified, a pressure reducing valve must be
installed between the water outlet and the hose set connection.
4. Modified or damaged water hoses may result in water leakage resulting in property or
appliance damage.
5. Never kink, crush, modify or cut through water hoses.
6. Only use the new water hoses supplied with the appliance or genuine spare hoses.
7. Never re-use water hoses that have been used before.
1. Swing the hose gently to confirm that the hose is securely
3. Do not bend the hose unduly.
at both ends. This is to ensure the connections remain
4. Periodically check the hose connections are firm
watertight over time.
Loading ...
Loading ...
Loading ...