Loading ...
PRODUCT INTRODUCTION
To ensure your safety and health, please use this equipment correctly.
It is important to read this entire manual before assembling and using the equipment.
Safe and eective use can only be achieved if the equipment is assembIed, maintained,
and used properly. It is your responsibility to ensure that all users of the equipment are
informed of all warnings and precautions.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, at level surface with a protective cover for your oor or carpet.
To ensure safety, the equipment should have at least 4 feet (120 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment.
The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
6. Always use the equipment as indicated. If you nd any defective components while assembling or checking the
equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the
equipment immediately and do not use until the problem has been rectied.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the
equipment.
8. Do not place ngers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 1000 LBS (455KG).
10. The equipment is not suitable for therapeutic use.
11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required.
12. Your product is intended for use in cool and dry conditions. You should avoid storage in extreme cold, hot or damp
areas as this may lead to corrosion and other related problems.
13. This equipment is designed for indoor and home use only; it is not intended for commercial use.
www.squatz.com
WHAT'S IN THE BOX
ASSEMBLY INSTRUCTIONS
1. Attach 2 Stabilizers (D) onto Bottom Connecting Frame (E) using 4 M10* 90mm Bolts (J), 4 M 10 Lock Nut (N),
8 Washers (M). Secure with Open End Wrenches (O). Do not tighten the 4 M10* 90mm Bolts (J) during this step.
2. Attach 4 Upright Posts (A) onto 2 Stabilizers (D) with 8 Upright Post Brackets (H) using 16 M10* 90mm Bolt (J),
16 M10* Lock Nut (N) and 32 Washers (M). Secure with Open End Wrench (0).
Do not tighten the 16 M10* 90mm Bolt (J) during this step.
Attach 2 Top Connecting Frames (F) onto 4 Upright Posts (A) using 8 M10* 65mm Bolt (K), 8 Lock Nuts (N),
16 Washers (M). Secure with Open End Wrench (O). Do not tighten the 8 M10* 65mm Bolt (K) during this step.
M
M
M
M
M
M
M
M
J
J
J
J
D
E
N
N
N
N
D
F. 2* Top Connecting
Frame
G. 2* Hook H. 8* Upright Post
Bracket
J. 20* M10 90mm Bolt
K. 14* M10
65mm Bolt
L. 2* M10 20mm Bolt N. 34* M10 Lock NutM. 70* Washer O. 2* Open End Wrench
A. 4 Upright Post B. 2 Safety Arm C. . 1* Pull Up Bar D. 2* Stabilizer
E. 1* Bottom
Connecting Frame
I. 2* Counterweight
Rod
Loading ...
Loading ...