Loading ...
Loading ...
Loading ...
Getting Started
WARNING! Periodically check the test date on the gas cylinder to ensure it is within its service life specification.
If required, contact an approved testing facility or gas supplier for re-certification or replacement.
WARNING! Follow all specifications and instructions exactly to prevent fire, explosion, property damage, personal
injury, or death.
WARNING! Check the hose for evidence of excessive abrasion, melting, cuts or cracks. If the hose is damaged, it
must be replaced with an assembly specifically recommended by Napoleon.
WARNING! Do not store a spare gas cylinder below the grill head or side burners.
WARNING! Never use a gas cylinder that is beyond 80% full.
GAS CONNECTIONS
This grill must operate with a gas supply pressure of 2.75 kPa (0.39 psi) for propane. Use a gas pressure regulator and hose
supplied by Napoleon; if not included, use a regulator and hose that meet national and regional codes.
The recommended length of the hose is 0.9 m. The hose must never be longer than 1.5 m. Check the hose regularly for rips,
melting, or wear. Replace if needed.
Note: The hose should be replaced before the expiry date printed on it.
To a Propane Cylinder
Only use a 9 kg propane cylinder constructed and marked in accordance with the AS/NZS 5601 and local codes. The cylinder
connection device must be compatible with the connection for this outdoor appliance.
The propane cylinder must have:
• A shutoff valve with an LCC27 connection. Do not use an adaptor at the cylinder connection.
• A safety relief device
• A collar to protect the valve
• A listed Overfill Protection Device
1. Check the cylinder for dents or rust, and have it
inspected by your propane supplier.
2. Ensure the gas regulator hose has no kinks.
3. Do not route the hose in close proximity to the drip pan.
4. Remove the cap or plug from the cylinder fuel valve.
5. Insert the LCC27 regulator connection onto the LCC27
fuel valve. Hand tighten to right. Do not use tools.
6. Ensure the hose does not contact any high temperature
surfaces of the grill because it will melt and cause a fire.
7. Leak test all joints prior to operating the grill.
See “Leak Test”.
3
2
1
Napoleon.com | Freestyle
®
Series Grills
Getting Started |
7
Loading ...
Loading ...
Loading ...