Loading ...
Loading ...
Loading ...
Vespera Instruction Manual v1.0 EN 2021-02 .docx 4
3. Place the level plate on the product at the level of Vespera’s power socket.
4. Look for the flattest, hardest ground possible. Avoid stony or loose ground to ensure maximum
stability.
5. Level the tripod by using the bubble level.
6. To make sure the tripod is stable, apply vertical pressure to the top of the tripod.
If the tripod remains stationary, you can proceed to the next step. If not, move the tripod and try
again on more stable ground.
Power supply
Vespera is equipped with an integrated battery with a 4 hour battery life.
Mains charging
Plug the product into the power outlet.
If the product is turned off: the button flashes green every 10 seconds when the product is charging
If the product is on: the button changes from blue to green every 10 seconds when the product is
charging
It is recommended to perform this charging step indoors.
V. Operation
Getting started
The button is tactile, no need to apply strong pressure
Charge the product to 100% before first use
To start the instrument, press the button on the side of the instrument.
The button flashes blue at first and then becomes static when Vespera is ready to be used (WiFi network
available).
Note:
• If the button does not light up, put it on charge for a few minutes.
• If the button flashes red once, the battery level is low.
• If the button flashes red twice, the battery level is very low; put the product to charge
• If the button flashes red 4 times, the product has a problem; contact the support service
Connecting to Vespera
Once turned on, Vespera creates its own Wi-Fi network.
To connect to it, first download the "Singularity" application from the App Store or Google Play.
Refer to the FAQ on our website to know the software versions supported by the application
Loading ...
Loading ...
Loading ...