Makita XAU01ZB 36V 18V X2 LXT Brushless 10" Pole Saw, 8' Length, Tool Only

Instruction Manual - Page 3

For XAU01ZB. Also, The document are for others Makita models: XAU01*

PDF File Manual, 44 pages, Read Online | Download pdf file

XAU01ZB photo
Loading ...
Loading ...
3 ENGLISH
Saw chain, guide bar, and sprocket combination
Saw chain type 90PX
Number of drive links 40
Guide bar Guide bar length 250 mm
(10″)
Cutting length 240 mm
(9-1/2″)
Pitch 3/8″
Gauge 1.1 mm
(0.043″)
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8″
Saw chain type 91PX
Number of drive links 40
Guide bar Guide bar length 250 mm
(10″)
Cutting length 240 mm
(9-1/2″)
Pitch 3/8″
Gauge 1.3 mm
(0.050″)
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8″
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may
result.
SAFETY WARNINGS
Important safety instructions
WARNING: Do not operate near electrical
power lines. The unit has not been designed to
provide protection from electric shock in the
event of contact with overhead electric lines,
Consult local regulations for safe distances from
overhead electric power lines and ensure that the
operating position is safe and secure before oper-
ating the saw chain pole pruner.
WARNING: When using electric gardening
appliances, basic safety precautions should
always be followed to reduce the risk of re,
electric shock, and personal injury, including the
following:
READ ALL INSTRUCTIONS.
1. Avoid Dangerous Environment - Do not use
appliances in damp or wet locations.
2. Don’t Use In Rain.
3. Keep Children Away - All visitors should be kept
at a distance from work area.
4. Dress Properly - Do not wear loose clothing or
jewelry. They can be caught in moving parts. Use
of rubber gloves and substantial footwear is rec-
ommended when working outdoors. Wear protec-
tive hair covering to contain long hair.
5. Use Safety GlassesAlways use face or dust
mask if operation is dusty.
6. Use Right Appliance - Do not use appliance for
any job except that for which it is intended.
7. Avoid Unintentional Starting - Do not carry
appliance with nger on switch. Be sure switch is
o󰀨 before inserting battery pack.
8.
Do not grasp the exposed cutting blades or cutting
edges when picking up or holding the appliance.
9. Do not Force Appliance - It will do the job better
and with less likelihood of a risk of injury at the
rate for which it was designed.
10. Do not Overreach - Keep proper footing and
balance at all times.
11.
Stay Alert - Watch what you are doing. Use common
sense. Do not operate appliance when you are tired.
12. Store Idle Appliances Indoors - When not in use,
appliances should be stored indoors in dry, and
high or locked-up place out of reach of children.
13. Maintain Appliance With Care - Keep cutting
edge sharp and clean for best performance and
to reduce the risk of injury. Follow instructions for
lubricating and changing accessories. Keep han-
dles dry, clean, and free from oil and grease.
Loading ...
Loading ...
Loading ...