Hoover HMIH 2T1047-80 Dishwasher

User Manual - Page 6

For HMIH 2T1047-80. Series: HDIH 2T1047-80*, HMIH 2T1047-80*

PDF File Manual, 46 pages, Read Online | Download pdf file

HMIH 2T1047-80 photo
Loading ...
Loading ...
Loading ...
4
Installation instructions
Parts supplied
Prior to installation
Unpacking and handling
Connections and services
Check packaging and dishwasher for signs of transport damage. If the
dishwasher is in any way damaged, do not install it. Contact the dealer the
dishwasher was purchased from.
Disposal of packaging: some of the packaging is recyclable. Check the symbols
and labels and recycle if possible.
Never lift the dishwasher from the door handle or the top panel. Doing so may
cause damage.
Always be careful with the hoses and power cord at the back of the dishwasher.
Careful handling will prevent damage and malfunction from squashing, kinking or cuts.
While installing the dishwasher, check the drain hose is not restricted or kinked.
Check that the
power cord is long enough to reach the outlet. If it isn’t, it must be
replaced by a haier authorised technician. Extension cords or multi-outlet power
boards should not be used to connect the dishwasher to the power supply.
Check that the hoses are long enough to reach the services. If a hose needs
extending, ensure that the extension hose is new and of equal quality and diameter
The dishwa
sher should not be connected to a water system where the
temperature exceeds 60
o
C.
The dishwasher must not be connected to an undersink high-pressure push-
through” type hot water system, as damage to the system will result.
Drain hose
support (1)
Installation and
User Instructions
Inlet hose (1)
Ø4 x 25mm
screws (4)
Brackets for
toekick (2)
Ø3.5 x 44mm
screws (4)
Ø3.5 x 13mm
screws (10)
Moisture protection
tape (1) (to prevent
moisture damage to
cabinetry)
Installing the
fixings
(2)
Salt funnel
Loading ...
Loading ...
Loading ...