THIRD ANGLE
PROJECTION
R
176
30°
30°
155 P.C.D.
A
A
TOP VIEW
43
22
3
135
49
SECTION A-A
SCALE 1 : 1.5
M6 Threaded
Rod in 3 positions
as shown
150
50
200
250
150
100
50
250
200
300
350
400
200
50
100
150
250
200
100
150
Web : www.zipindustries.com
Email : [email protected]
100
Dimensions in
millimetres
Drawing to
BS8888:2004
Screw threads to
BS 8498:2008
File Ref : C:\Zip_PDM\Engineering\Projects\Project 10015\2. Design\Fonts\93441
Sheet1 (Default)
Rev
Size
Project :
HydroTap G4®
Configuration :
Default
Production
Volume
(cm3)
:
133.4
1485.7
Area
(cm2)
:
ERROR!:Density
Density
(g/cm3)
:
Mass
(g)
:
Material :
Finish :
See Components
Checked by :
Approved by :
Scale :
Derived from :
Status :
Description :
Model :
Drawing :
93441
Zip Industries
Manufacturing Instructions
ERROR!:Derived From
EdgarG
on 10/04/2015
Unapproved on 1/01/2001
1:5
Sheet :
1
of
1
See Components
690.4
93441
Kit Stand Alone Font CH
Bright Chrome
Zip Industries Pty Ltd
67 Allingham Street
Condell Park
Sydney
NSW 2200
Australia
This drawing is CONFIDENTIAL and is supplied on the express condition that it shall not be LOANED, COPIED or DISCLOSED to
any other third party or used for any purpose without the written consent of Zip Industries Pty Ltd. If this document is printed in
hardcopy form, it is for INFORMATION ONLY and therefore not subject to updating controls.
For the current revision ALWAYS refer to the NATIVE electronic form as stated in the top left-hand corner of this sheet.
© copyright Zip Industries Pty Ltd, 10/04/2015
Make or Buy :
Manufacturing Route :
Raw material :
Remove all sharp edges. This drawing ONLY details information
which cannot be ascertained from the 3D geometry of the part(s)
attached. Model & dimensions are AFTER all finishing operations
Comments :
This Kit is suitable for G4 HydroTap Classic Tap, HydroTap Elite,
HydroTap Arc & Cube with corresponding distances from the
centre of the Taps to the centre of the Font.
See Components
See Components
Buy
NoNo
Recyclable? :
Potable? :
Created by & on
Created by & on
A3
A
EdgarG on 28/01/2010
Updated by :
edgarg on 10/04/2015 12:02:39 PM
edgarg on 10/04/2015
Handed? :
No
ERROR!:Approval Number
ERROR!:Approval Expiry Date
ERROR!:Colour
Colour :
_Drawing
Property
Config
Property
Custom
Property