AUSTRALIA / NEW ZEALAND
Assembly and Operating Instructions
DISCOVERY
1100 SERIES
TRIM KIT
1100S, 1100E, 1100
3, 4 OR 5 BUILT IN BURNERS
FOR OUTDOOR USE ONLY
AUSTRALIA
phone: 1300 307 939
fax: 1800 356 669
email: customercare@electrolux.com.au
web: beefeaterbbq.com
NEW ZEALAND
phone: 0800 436 245
fax: 0800 225 088
email: customercare@electrolux.co.nz
web: beefeaterbbq.com
© 2017 Electrolux Home Products Pty Ltd.
ABN 51 004 762 341
BMAN_DisTrimKit_Jul17
Instructions
NOTE: the full Barbecue assembly instructions can be found
in the Barbecue Carton. These instructions only refer to
placement of Trims in Built-In situations.
1) Attach the RH Bracket and LH Bracket to Barbecue
body using 8 off M6 x 12mm screws as follows:
NOTE: Washers are to be placed between the Barbecue
body and the bracket.
2) Place BBQ into its position in the bench, resting on the
brackets installed in (1).
3) Attach the rear trim to place:
4) The front cover can be removed for accessing the Fat-
Collecting Pan and replaced:
QTY DESCRIPTION QTY DESCRIPTION
1 Front Cover 10 M6 x 12mm Screws
1+1 RH Bracket + LH Bracket 10 M6 Fiber Washers
1 Back Cover
Contents
