Dewalt DCF897P2 Instruction Manual

Loading ...

ENGLISH

NOTE: Battery packs should not be stored completely

depleted of charge. The battery pack will need to be

recharged before use.

SAVE THESE INSTRUCTIONS FOR

FUTURE USE

Motor

Be sure your power supply agrees with the nameplate

marking. Voltage decrease of more than 10% will cause loss

of power and overheating.

DEWALT

tools are factory tested;

if this tool does not operate, check power supply.

COMPONENTS (FIG. A)



WARNING: Never modify the power tool or any part

of it. Damage or personal injury couldresult.

Refer to Figure A at the beginning of this manual for a

complete list ofcomponents.

Intended Use

This impact wrench is designed for professional impact

fastening and drilling applications. The impact function

makes this tool particularly useful for driving fasteners in

wood, metal and concrete.

DO NOT use under wet conditions or in presence of

flammable liquids orgases.

DO NOT let children come into contact with the tool.

Supervision is required when inexperienced operators use

thistool.

OPERATION



WARNING: To reduce the risk of serious personal

injury, turn unit off and disconnect it from

power source remove the battery pack before

making any adjustments or removing/installing

attachments or accessories. An accidental start-up

can causeinjury.

Installing and Removing the Battery Pack

(Fig. D)

NOTE: For best results, make sure your battery pack is

fullycharged.

To install the battery pack

6

into the tool handle, align the

battery pack with the rails inside the tool’s handle and slide

it into the handle until the battery pack is firmly seated in

the tool and ensure that it does notdisengage.

To remove the battery pack from the tool, press the release

button

5

and firmly pull the battery pack out of the tool

handle. Insert it into the charger as described in the charger

section of thismanual.

Fig. D

Proper Hand Position (Fig. E)



WARNING: To reduce the risk of serious personal injury,

ALWAYS use proper hand position as shown.



WARNING: To reduce the risk of serious personal injury,

ALWAYS hold securely in anticipation of a sudden

reaction.

Proper hand position requires one hand on the main

handle

4

Fig. E

Variable Speed Trigger Switch (Fig. A)

To turn the tool on, squeeze the trigger switch

1

. To turn

the tool off, release the trigger switch. Your tool is equipped

with a brake. The anvil will stop when the trigger switch

is fully released. The variable speed switch enables you to

select the best speed for a particular application. The more

you squeeze the trigger, the faster the tool will operate. For

maximum tool life, use variable speed only for starting holes

or fasteners.

NOTE: Continuous use in variable speed range is not

recommended. It may damage the switch and should

beavoided.

Forward/Reverse Control Button (Fig. A)

A forward/reverse control button

2

determines the

direction of the tool and also serves as a lock-off button.

To select forward rotation, release the trigger switch and

depress the forward/reverse control button on the right side

of the tool.

To select reverse, release the trigger switch and depress the

forward/reverse control button on the left side of the tool.

Loading ...

Dewalt DCF897P2 20V MAX XR High Torque 3/4 in. Impact Wrench w. Hog Ring Anvil 5.0Ah

Instruction Manual - Page 10