Loading ...
Loading ...
Loading ...
You can solve many common appliance problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling the servicer.
Problem Possible cause
Appliance does not operate. Not plugged in.
The appliance is turned off.
Tripped circuit breaker or blown fuse.
Appliance is not cold
enough.
Check the temperature control setting.
External environment may require a higher setting. The
door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently. The room temperature is higher than normal.
A large amount of contents has been added to the
appliance.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work. Not plugged in.
Tripped circuit breaker or blown fuse.
The bulb has burned out.
Vibrations. Check to be sure the appliance is level.
The appliance seems to
make too much noise.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
appliance.
Contraction and expansion of the inside walls
may cause popping and crackling noises. The
appliance is not level.
The door will not close
properly.
The appliance is not level.
The door was reversed and not properly re-installed. The
gasket is dirty.
The shelves are out of position.
www.blazegrills.com
TROUBLESHOOTING GUIDE
15
Loading ...