Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTION
Tools Required for Assembling the Machine: Two Adjustable Wrenches.
NOTE: It is strongly recommended that two or more people assemble this machine
to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Connect the two Upright Beams (#1) by a Cross Brace (#2) in the mid-span.
C.) Secure each end of Cross Brace to each Upright Beam with two M10 x 2 ½” Carriage
Bolts (#23), one 4 ¾” x 3 ½” Bracket (#13), two Ø ¾” Washers (#33), and two M10
Aircraft Nuts (#35).
D.) Insert the Backrest Adjustment Bar (#6) through the selected holes on the Upright
Beams to obtain desired Backrest incline. DIAGRAM 1
5
Loading ...
Loading ...
Loading ...