Loading ...
Loading ...
Loading ...
Getting to know your appliance en
11
Controls and burners
Each control knob is marked with the burner it controls.
You can use the control knobs to set the output
required in each case to various positions between the
maximum and the minimum settings. Never try to switch
directly from position 0 to position 1 or from position 1
to position 0.
For dual-wok burners, the inner and outer flames can
be controlled separately. The available power levels are
as follows:
It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to
work correctly. Do not swap the burner caps around.
Always remove the pan supports carefully. When
moving a pan support, the pan supports next to it may
also move.
Accessories
Depending on the model, the hob may include the
following accessories. These can also be acquired from
the Technical Assistance Service.
Indicators
’
Burner controlled by control knob
Û
Switched-off burner
— 9
Highest power setting and electric ignition
1 ˜
Lowest power setting
Inner and outer flame on
full power.
Outer flame on low power,
inner flame on full power.
Inner flame on full power.
Inner flame on low power.
Burner parts
1 Ignition plug
2 Thermocouple
3 Burner cup
4 Burner cap
Additional wok grid
Only suitable for use on wok
burners. Use with cookware
with a rounded base.
To extend the service life of the
appliance, we recommend using
the additional wok grid.
Additional espresso maker
grid
Only suitable for use on the
smallest burner. Use cookware
with a diameter of less than
12 cm.
Loading ...
Loading ...
Loading ...